Barco 4MP/6MP manual First time starting up

First time starting up

You are now ready to start up your CORONIS FUSION 4MP/6MP display system for the first time.

1Switch on your CORONIS FUSION 4MP/6MP display as described in “Stand-by switching” on page 24.

2Turn on the computer connected to your display.

If you have properly installed your display and display controller, the Windows start-up messages will appear once the boot procedure is finished.

Your CORONIS FUSION 4MP/6MP display will be running in a basic video mode at a default refresh rate when first time starting up.

If you are using a Barco display controller, please consult the dedicated user guide available on the system CD to install the drivers, software and documentation. When this is done, your display will automatically detect the connected video input signal(s) and apply the correct video mode and refresh rate.

Coronis Fusion 4MP/6MP 21