TO ENABLE THE USER CONTROLS AGAIN USING THE TOUCH KEYS:

1To enter the user controls keycode, the OSD must not be visible.

2Touch any of the soft touch keys to switch on the front illumination.

3While the illumination is on, touch the following keys in successive order:

Enter , Down , Up , Down , Enter .

As a result, the User Controls setting in the Settings menu is switched on again.

TO ENABLE THE USER CONTROLS AGAIN USING THE CONTROL WHEEL:

1The OSD must not be visible.

2Press and hold the control wheel for at least 5 seconds.

3Rotate the control wheel 1 step clockwise.

4Press the control wheel 2 times.

5Rotate the control wheel 1 step counterclockwise. The on-screen display appears.

Steps 3 to 5 must be performed in maximum 3 seconds.

As a result, the User Controls setting in the Settings menu is switched on again.

40 Coronis Fusion 4MP/6MP

Page 40
Image 40
Barco 4MP/6MP manual To Enable the User Controls Again Using the Touch Keys