Coronis Fusion 4MP/6MP 45
TO SELECT A DICOM OFFSET:
1Select the DICOM display function. See To select a display
function (DF):, on page 43.
2Switch Continuous DICOM ALC off. See To switch continuous
DICOM ALC on/off:, on page44.
3In the ALC & DICOM Options menu, select DICOM Offset.
4Select an offset.
5Return to the ALC & DICOM Options menu.
You can select the following offsets:
Reading room selection
This function is available only when the DICOM display function is
selected and Continuous DICOM ALC is off.
Dark room The DICOM DF will be recalculated taking
an ambient light value of 0 lux into
account.
This means that the measured ambient
light does not influence the DICOM DF.
Preset The DICOM DF will be recalculated taking a
preset ambient light value into account.
This value is determined by the selected
Reading Room and can be adjusted
manually within certain limits.
Measured ALC The DICOM DF will be recalculated taking
the averaged measured ambient light
value into account that is determined by
the selected Reading Room. This value can
be changed by executing the “Measure ALC
Value” function in the Reading Room
Definition submenu.