6. General Menu

Howtofreezetheimage?

1. Press MENU to activate the Toolbar
2. Press →to select General
3. Press ↓to Pull down the General menu
4. Use ↑or ↓to select Freeze (image 6-2)
5. Press ENTER to activate the Freeze function
Image6-2
TheimagecanalsobefrozenusingtheFREEZEkeyontheRCU
6.3 Standby Timer

Purpose of the Standby Timer

Ifthere is no signal, and the standbytimer is enabled, a dialogbox is disp layeda nd the projector will shut down after a determined
time.
Image6-3
Thecountdown time can b e set in a dialog box in a range from 180 to 3600 seconds (default value = 300). The Timer can also be
disabled.

How to enable the timer ?

1. Press MENU to activate the Toolbar
2. Press →to select General
3. Press ↓to Pull down the General menu
4. Use ↑or ↓to select Standby Timer (image 6-4)
5. Press ENTER to activate the function
On the screen appears a dialogbox (image 6-5)
6. Use ↑or ↓to select Enabled, a box surrounds the selected item, press ENTER to activate
7. Use ↑or ↓to browse to the input field
8. Use ←or→, the numeric keys on the remote or the keypad to change the countdown setting
9. Press MENU or BACK to exit or to go back to the previous menu
36 R5976455 BARCO ULTRA REALITY 7000 30062003