7. Image Menu
Selecting Auto in case of a Video source may shrink the image horizontally

How to change the Aspect ratio ?

1. Press MENU to activate the Toolbar
2. Press →to select Image
3. Press ↓to Pull down the Image menu (image 7-3)
4. Use ↑or ↓to select Aspect ratio
5. Press ENTER to confirm
Image7-3
7.3 Show native resolution
What can be done ?
Theaim here is toalways show the resolution of thesource independently of theresolution of the LCD panels.
The “show native resolution” function will handle the sources as follows:
Source Projected image
Name Ratio Resolution Ratio Resolution Particularities
Reality
xga 4:3 1024x768 4:3 1024x768 imagecentered +side blanked
sxga 5:4 1280x1024 5:4 1280x1024 imagecentered +side blanked
sxga+ 4:3 1400x1050 4:3 1400x1050 imagecentered +side blanked
uxga 4:3 1600x1200 4:3 1600x1200 image centered
Table7-1
Shownative resolution = ON in case of a BARCO ULTRA REALITY 7000 projector
TheFull screen representation function on the other hand forces to use the complete native resolution of the
LCD panels,

How to enable the “Show native resolution” function?

1. Press MENU to activate the Toolbar
2. Press →to select the Image item
3. Press ↓to Pull down the Image menu
4. Use ↑or ↓to select Show native resolution (image 7-4)
46 R5976455 BARCO ULTRA REALITY 7000 30062003