10. Image files menu
10. IMAGE FILES MENU
Overview
• Load file
• Auto Image
• Edit file
• Rename file
• Copy
• Delete

Introduction to image files

An image files contains the main characteristics of a source (number of active lines,...). The projector’s memory contains a list of
filescorresponding to the most common sources, these are the standard files (file extension = *.s). Whena new source corresponds
toone of these files, a custom file (file extension =*.C) is created and saved for future use.
Whenthere is a little difference, the file can also be loadedand then edited until the source specs are reached.
The AutoImage function creates automatically the best suited image file (custom file) for a new source. A u-
toImage is used when:
-a new source is detected : AutoImagecreates a new custom file which can always be edited if necessary.
- the AutoImage button on the RCU is pressed
AutoImage works only in full screen mode
If the AutoImage function does not succeed in finding a file and no file is loaded (load list is empty), which
means that the source is not displayed, then use the copy function,

10.1 Load file

Howtoloadafile?

1. Press MENU to activate the Toolbar
2. Press →to select the Image files item
3. Press ↓to Pull down the Image files menu
4. Use ↑or ↓to select Load (image 10-1)
5. Press ENTER
A dialogbox is displayed (image 10-2)
6. Use ↑or ↓to select the desired file
Tip: For more info about the available image files and the specifications, see appendix B
7. Press ENTER
The file is loaded and the image is adapted.
Image10-1
R5976455 BARCO ULTRA REALITY 7000 30062003 65