6. General Menu
6.8 Reset runtime

When to reset the lamp runtime ?

The lamp runtime should only be reset when placing a new lamp.

How to reset the lamp runtime ?

1. Press MENU to activate the Toolbar
2. Press →to select the General item
3. Press ↓to Pull down the General menu
4. Use ↑or ↓to select Reset runtime
5. Press →to pull down the menu
6. Use ↑or ↓to select the lamp to be reset (image 6-13)
7. Press ENTER
A dialogbox is displayed (image 6-14)
8. Use←or →, the numeric keys on the remote, or the keypad tochange the serial number of the lamp (serial number 0000000 will
not be accepted).
Image6-13
Image6-14
Lampruntime reset as well as the lamp replacement can only be done by a Barco authorized technician.
6.9 Runtime warning
What can be done ?
Whenthe lamp has reached a certain predetermined runtime , a warning message will be displayed on the screen. The lamp runtime
warning can be set in a range from 30 to 200 hours. The runtime warning is displayed by default at 30 hours before end of lamp
lifetime.
40 R5976455 BARCO ULTRA REALITY 7000 30062003