7. Image Menu
Thefilmmode detection insures that these converted signals are shown without artefa cts.
Thisfunction may cause undesired effects on standard source s, therefore it can be disabled (OFF) at any time

Enabling/disabling the filmmode detection

1. Press MENU to activate the Toolbar
2. Press →to select the Image item
3. Press ↓to Pull down the Image menu
4. Use ↑or ↓to select Filmmode detection
5. Press →to pull down the menu
6. Use ↓or ↑to enable or disable the Filmmode detection
7. Press ENTER
A white bulletshow s the activesetting (image 7-14)
Image7-14
7.8 Advanced settings

7.8.1 Noise reduction

How to change the Noise reduction ?

1. Press MENU to activate the Toolbar
2. Press →to select the Image item
3. Press ↓to Pull down the Image menu
4. Use ↑or ↓to select settings
5. Press →to pull down the menu
6. Use ↓or ↑to select Noise reduction
7. Press ENTER
On the screen appears now a sliderbox
8. Use ←or →, the numeric ke ys on the remote, or the keypad to change the Noise reduction setting.
R5976455 BARCOULTRA REALITY 7000 30062003 51