11. Display setup
11.8 Au toImag e Setup
What can be done ?
Autoimageallows to detect automatically the character istics of the source (total pixels per line,...) and uses this information to adapt
the image to the LCD panels.
Autoimage can adapt the image based on following data :
• Totalpixels per line
• Start pixel
• Phase
• Contrast/brightness levels
Autoimage works only for data signals.

How to set up AutoImage?

1. Press MENU to activate the Toolbar
2. Press →to select the Display setup item
3. Press ↓to Pull down the Display setup menu
4. Use ↑or ↓to select AutoImage setup (image 11-9)
5. Press ENTER
A dialogbox is displayed.
(image 11-10)
6. Use the arrow keys to select the desired item and press ENTERto activate or disactivate the item.
Image11-9
Image11-10
R5976455 BARCO ULTRA REALITY 7000 30062003 77