12. Installation menu
Image12-5 Image12-6
Entering the new projector address ?
1. Enter the new projector address withthe digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 and 255.
How to change the common RC5 address ?
1. Press MENU to activate the Toolbar
2. Press →to select the Installation
3. Press ↓to Pull down the Installation menu
4. Use ↑or ↓to select Projector address
5. Press ENTER
A dialogbox appears on the screen. (image 12-7, image 12-8)
Image12-7 Image12-8
Entering the new common address ?
1. Enter the new projector address withthe digit keys on the RCU, the local keypad or the cursor keys.
This address must be between 0 or 1.
12.3 Orientation
Projector orientations
Dependingon how the projector is oriented, the projector ’sinternal sett ingshave to be adapted.
How to change the orientation ?
1. Press MENU to activate the Toolbar
2. Press →to select the Installation item
3. Press ↓to Pull down the Installation menu
4. Use ↑or ↓to select Orientat ion
5. Press →to pull down the menu
6. Use ↓or ↑to select the desired orientation (image 12-9)
7. Press ENTER
The projectionis adapted and a black bullet shows the active conf iguration.
R5976455 BARCO ULTRA REALITY 7000 30062003 81