10. Image files menu

Advanced edit

On
Comb filter
Off
Short
AGC hold interval
Long
Coarse
Sharpness
Fine
Image10-8
video signal video signal
frame blanking
HI
egalisation
Image10-9
HI AGC Hold interval
The Comb filter is by default enabled.
TheAGC hold interval is the time interval in which the AGC is inhibited (AGC hold = no update in video amplitude measurement),
the advanced parameter allows to choose a short or long hold interval.
A long AGC hold interval eliminates Macrovision®disturbances since the AGC is hold during a long interval, thus reducing the
probability to encounter a Macrovision®pulse.
Sharpness adjustment can be chosen to be coarse or fine.
It is recommended to use the default values.
Advanced Data settings
Theadvanced button e nables the advanced settings for a data source.

Advanced edit

VCO range
PLL Cpmp
0
0
Clamp position
Clamp width
16
16
RGB
PR/Y/PB
Input format
HDTV-PR/Y/PB
Image10-10
TheVCO range setting determines the frequency range of t he VCO (VoltageControlled Oscillator).
TheCpmp (C harge pump current) sets the low pass filter current.
BothVCO range & Cpmp are set by the image file, changing these settings is only indicated in for special purposes.
Theinput format settings are used to "tell more" about the signals connected on the BNC’s, it completes the information in the source
selection menu.
It is recommended to use the default values.
R5976455 BARCOULTRA REALITY 7000 30062003 69