3. Configuration W izard
How to select
1. If you want to upload everything in the list,just check the checkbox on top of the window next to Update
Selection.
2. If you want to upload only partof the list, check only the checkbox next to the items you want to upload.
Note: When one item is unchecked, the checkbox on top be uncheck too.
The following items can be updated:
Digitizer output Set the output to selected outputin the wizard
Digitizer mode Sets the operation mode of the digitizers (master / slave). For Slave,
make also the choice betweenResync or Direct.
Digitizer Timings The output field willbe set to the selected resolution in the wizard
Overlap coordinates Virtual coordinates for each screenare set by taking in account the
overlap coordinates
Status Windows Sets the mode and visibility of each win dow
Soft edgesettings Set to default values
Lock mode settings Set lock mode status
3. Click Next>> to update.
A log window will be displayed in which you can followthe process. (image3-28)
Image 3-28
Update log window
3.3.12 Output check
Whensoft edge or Scenergix is available on the projectors, disable this function as edge
blending will be done by the digitizers. Consult the projector’s user guide to find out
how to disable this function.
What will be done?
A multiburst pattern (pixelon - pixel off) will be sent to the projector to check the image quality.
How to proceed for digital output
1. Check the checkbox Activate multiburst pattern to check the output projectors. (image 3-29)
2. Click on Next>> to activate the pattern.
A log window will be displayed inwhich you can follow the process. (image3-30)
3. Visually check thetest pattern on the screen. It should look like the test pattern on the test page.
(image 3-31)
R5976476 VIEWSCAPE TOOLSET 01/07/2004 29