7. Windowing
7.2 Selecting a Window
Overview
There are two ways to select activate a window. One via the workspace and one via the Window input
box.

Window selection via the workspace

1. Click with your mouse on the window you want toselect.
If the selected window is not a background,the outline will be come white.

Window selection via the Window input box

1. Click on the drop down box containing the differentwindows. (image 7-1)
2. Select the desired window.
All windows areindicated with their name, followed a input number between brackets. Whenno name
was entered during the configuration set up, the name was set to default.
The selectedwindow becomes active. Theinput label below the selection box changes to correspond-
ing input and the background color of that label changes also to the same background colorof the
selected window. All output settings for that specific source changecorrespondingly.
Image 7-1
Window selection
7.3 Moving a window

Moving via the workspace

1. Click on a window and hold the mouse buttondown to grab the selected window. (image7-2)
2. Move the window as is required. (image 7-3)
Image 7-2
Select window Image 7-3
Move window

Moving via the Window Input Box

1. Select the window you want to move.
2. Change the X and Y value indicatingthe start position of the window by clicking on the +or -keys
Or,
by entering a new value with the keyboard. (image 7-4)
48 R5976476 VIEWSCAPE TOOLSET 01/07/2004