3. Configuration Wizard
4. Is the result OK?
If yes, go to step 5
Ifno, follow the set up procedure in the installation manual of the projector and continue thenwith step 5.
5. Check the radio button in front of Result is OK and click Next>>.
Image 3-29
Activate multiburst pattern
Image 3-30
Update test pattern log window
Image 3-31
Visualoutput c heck
How to proceed for analog output1. Check the checkbox Activate multiburst pattern to check the output projectors (image 3-29).
2. Click on Next>> to activate the pattern.
Alogwin
dow will be displayed in which you can followthe process.
3. Visually check thetest pattern on the screen. It should look like the test pattern on the test page.
(image 3-32)
4. Is the result OK?
If yes, go to step 8
If no, follow the set up procedure and continuewith step 5.
5. Click on Step1. (image 3-33)
Consult the user manual of your projector to adjustthe timing values (clock settings). Adjust until the
number of bands are zero or almost zero.
6. Click on step2. (image 3-34)
Adjustthe phase of the projector until a sharper images appear without motion. Consult the user manual
of the projector to find outhow to adjust the phase.
30 R5976476 VIEWSCAPE TOOLSET 01/07/2004