Barco R5976476/03 3.3.13 Mechanical overlap setup, What should be done, How to proceed

3. Configuration Wizard
Image 3-34
Adjustment of Phase
3.3.13 Mechanical overlap setup
Overlap zone
Thecommon area of 2 projector images next to each other. In this zone there will be soft edge
blending, so that the combined screenswill look like one big screen.
What should be done
The overlap area should be mechanically adjustedby shifting the lenses.
Image 3-35
Update patterns
How to proceed
1. If you want to upload everything in the list,just check the checkbox on top of the window next to Update
Selection.
2. If you want to upload only partof the list, check only the checkbox next to the items you want to upload.
Note: When one item is unchecked, the checkbox on top willbe uncheck too.
The following items can be updated:
Overlap setup A special outline pattern willbe applied
Soft-edge setup Mark off lines ofsoft-edge blending will be shown
3. Click on Next>> to apply the test patterns.
A log window will be displayed in which you can followthe process. (image 3-36)
32 R5976476 VIEWSCAPE TOOLSET 01/07/2004