Barco R9001390 manual Location And Functions Of Control, Location and Functions of Control

						Location and Functions of Control
3	LOCATION AND FUNCTIONS OF CONTROL
Front Panel Terminology		￿￿	￿￿	￿￿￿￿￿9				￿
		0￿I	￿￿￿￿￿￿￿￿￿￿￿￿￿￿+]$		￿￿￿		￿	￿
					PROJECTOR MODE:
					GREEN- OPERATION	DIAGNOSTICS		SDI INSDI OUT￿
		RS232 OUT	RS 232 IN	COMMUNICATION PORT	RED- STANDBY	IR-ACKNOWLEDGED CODE	IR-RECEIVER
				(800-PERIPHERALS) REMOTE
						IR-RECEIVED

1	RS232 IN : to allow communication with external compu-
	ter, e.g. IBM PC or compatible, Macintosh ...

RS232 OUT : used to connect to next projector, RS232IN

2plug (communication link for PC or MAC to the next projector).

3	Communication port : allows communication with the
	800 peripherals.

4Remote : remote input for wired remote control.

Projector mode indication : indicates the status of the

7	IR-Received : IR signals are received but not recognized
	by the projector.

Diagnostics code : a) source number

8 b) error code : a two digit error code is displayed when something goes wrong inside the projector.

9	IR receiver : receiver for control signals transmitted from
	the RCU.

10Power switch : '1' = on, '0' = off

5 projector.

Light off : power switch is not pressed.

Red light : power switch is pressed, projector in stand by mode.

Green light : projector in operational mode.

11

12

Power input : autoranging from 200 to 240 Vac.

Identification plate : name, serial number, art. number.

Voltage identification plate : name, art. number.

6IR-Acknowledged : IR signals are recognized.

Control Panel Terminology a. Local keypad

Gaining access

SDI IN - SDI OUT (option): Serial digital input and loop trough

13output.

2 x BNC terminals.

The keypad is located behind a door, screened with the name of the projector.

To open the door, push once on the indicated side of the door and turn it to the front side of the projector.

5975938 BARCOREALITY 9200TCR+ 020798 3-1