Barco R9001390 Video/S-video Input Module, 9,269,2VIDEO,1387, Floating ORDWLQJRUQRQIORDWLQJLQSXW

					Connections
Video/S-video Input Module		S-VIDEO		9,'(2￿6￿9,'(2VIDEO￿,1387
	On			AUDIO		27900
			L	On
				R
To the Video input :						98
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :			Audio input not
Separate Y-luma/C-chroma signals for higher quality playback of		S-Video input	available		Video input
Super VHS-signals.		PROJECTOR MODE :
		GREEN - OPERATION	DIAGNOSTICS
	COMMUNICATION PORT	RED - STANDBY IR-ACKNOWLEDGED CODE		IR-RECEIVER

1 x 4 pins plug (mini DIN)

RS232 OUT

RS 232IN

(800-PERIPHERALS)

REMOTE

SDI IN

SDI OUT

pin configuration :

IR-RECEIVED

1

ground luminance

R

G

B

H

V

R

G

B

V

6￿9,'(29,'(29,'(2￿,1387

2791098

H / C

R

G

B

H / C

V

On

2

ground chrominance

3

luminance 1.0 Vpp ± 3 dB

4

chrominance 282 mVpp ± 3 dB

Input selection : Luma/Chroma

Key in the corresponding slot number on the RCU or the local keypad. Depending on the priority setting in the Input slots menu, Video or S-Video will be displayed. If the wrong source type is displayed, start up the adjustment mode by pressing ADJUST or ENTER.

VCR S-VHS	TV tuner, e .g .
	TV DM 40 stereo
	VC R

Com posite

Video

A udio am plifier

Push the control disc up or down to highlight Installation and press ENTER to display the 'Installation menu'.

EXIT returns to operational mode.

Use the control disc to select 'Input Slots' by pushing it up or down and press ENTER. The internal system will scan the inputs and displays the result in the 'Input Slots menu'.

Push the control-￿￿disc-￿￿up or down to-select￿￿the corresponding (video or S-video) input slot number.

To change the priority between Video and S-Video, press ENTER key to toggle.

Non-Floating

Floating )ORDWLQJ￿RU￿QRQ￿IORDWLQJ￿LQSXW

ADJUSTMENT MODE

Select a path from below :

RANDOM ACCESS

INSTALLATION

SERVICE

Select with	or
then	INSTALLATION
<EXIT> to
	INPUT SLOTS
	800 PERIPHERAL
	CONVERGENCE
	CONFIGURATION
	Select	INPUT SLOTS
		Slot Module type	[Config]
		1. RGB-SS [CV]
		2. RGB-SOG
		3. Video [Video]
		4. Component Video
		Select with	or
		<ENTER> to	toggle
		<EXIT> to return.

Straps on module level.
Floating or non-floating input.
Video input :
J11	: strap "yes" : non floating	strap "no" : floating
S-Video input :
J12	: strap "yes" : non floating	strap "no" : floating
J13	: strap "yes" : non floating	strap "no" : floating

Factory preset : strap on, input non floating.

5975938 BARCOREALITY 9200TCR+ 020798 5-5