Service Mode
Change Projector Address
Change Language
Every projector requires an individual address between 0 and 255. ThisHighlightaddressLangucangebeby softwarepushing theinstalledcontrol. disc up or down and press ENTERTo changeto selectthat address,the LangpushagetheSeleccontionr l discmenuup. or down to highlight ChAvailablengeProjlanguages.Address: English,and pressFrenchENTERand. ChineseTheChange Projector Address menu will be displayed and the actual address will be filled in. The first digit is highlighted. Enter the new projector address with
:
-the digit keys on the RCU or the local keypad or
-use the control disc to the right or to the left to select a digit and change the value by pushing the control disc up or down until the new value is reached. Continue with the other digits on the same way.
Change Baudrate PC
The communication speed between projector and computer, e.g. PC or MAC, has 8 possible speeds. The baud rate speed can be software set.
Highlight Change Baud rate PC by pushing the control disc up or down and press ENTER to display the Change Baudrate PC menu.
The following baud rates are available :
9600/4800/2400/1200/600/300/150/75
The actual baud rate will be highlighted. To change the baud rate, push the control disc up or down and press ENTER to accept the new baud rate setting.
Reset Lamp Runtime
Reset lamp run time is only allowed when a new lamp is installed. Highlight Reset Lamp Run Time by pushing the control disc up or down and press ENTER to select.
When Reset Lamp Run Time is selected in the Service Mode selection menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the reset operation.
SERVICE
IDENTIFICATION
CHANGE
PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
Select with |
|
then |
|
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
SERVICE |
|
|
|
IDENTIFICATION |
|
|
|
CHANGE PASSWORD |
|
|
|
CHANGE LANGUAGE |
|
|
|
CHANGE PROJ. ADDRESS |
|
|
|
CHANGE BAUDRATE PC |
|
|
|
RESET LAMP RUNTIME |
|
|
|
LAMP RUNTINE HISTORY |
|
|
|
LAMP DRIVE MODE |
|
|
|
MORE ... |
|
|
|
then <ENTER> CHANGE LANGUAGE | |||
<EXIT> to return. |
|
|
|
CHANGE PROJ. ADDRESS | |||
English |
| ||
Français |
| ||
Enter new address | |||
Chinese |
| ||
001 |
|
| |
Select with | or | ||
Reprogram with | or | ||
or numeric keys |
| ||
<ENTER> | to | confirm | |
<EXIT> | to | return |
|
SERVICE |
| ||
IDENTIFICATION
CHANGE
PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE : NORMAL
MORE...
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
SERVICE |
IDENTIFICATION |
CHANGE PASSWORD |
CHANGE LANGUAGE |
CHANGE PROJ. ADDRESS |
CHANGE BAUDRATE PC |
RESET LAMP RUNTIME |
LAMP RUNTINE HISTORY |
LAMP DRIVE MODE |
MORE |
WARNING |
Select |
RISK OF |
ELECTRICAL SHOCK |
______________________________________________________________ |
RESET LAMP RUN TIME |
is reserved to |
qualified |
service personnel |
<ENTER> to accept |
<EXIT> to return. |
5975938 BARCOREALITY 9200TCR+ 020798 |
