Barco R9001390 manual Serial Digital Input slot, 6HSDUDWH--6\QFV-VHOHFWLRQ\QFRQJUHHQ

Connections

Straps on Module Level :

Floating or non-floating input.
Red :	J3	: strap "yes" : non floating	strap "no" : floating
Green : J4 : strap "yes" : non floating			strap "no" : floating
Blue :	J5	: strap "yes" : non floating	strap "no" : floating
H/C :	J6	: strap "yes" : non floating	strap "no" : floating
V :	J7	: strap "yes" : non floating	strap "no" : floating

Factory preset : strap "yes", non floating input

Sync selection.

J8 : separate sync or sync on green.

Factory preset : separate sync.

Serial Digital Input (slot 5)

-￿-￿6HSDUDWH--￿￿￿6\QF￿V-￿￿VHOHFWLRQ\QF￿RQ￿JUHHQ-￿

Non-Floating

Floating )ORDWLQJ￿RU￿QRQ￿IORDWLQJ￿LQSXW

Full compatibility with digital Betacam, or other digital video sources.

This avoids the need for analog video processing anywhere in the video production chain and guarantees the ultimate image quality.

An active loop-through of the SDI input signal is provided for monitoring or for double and or triple stacking applications.

			PROJECTOR MODE :
			GREEN - OPERATION	DIAGNOSTICS
	RS 232 IN	COMMUNICATION PORT	RED - STANDBY	IR-ACKNOWLEDGED CODE	IR-RECEIVER
RS232 OUT		(800-PERIPHERALS)	REMOTE			SDI IN	SDI OUT

IR-RECEIVED

R

G

B

H

V

R

G

B

H / C

V

6￿9,'(29,'(29,'(2￿,1387

R

G

B

H / C

V

9827910

On

Connections :

One BNC input terminal and one active loop-through BNC output terminal.

The input is always 75 ohm terminated. The output inpedance of the SDI out is 75 ohm.

Input selection :

Key in 5 on the RCU or the local keypad.

Note : When a RCVDS05 is connected to the projector, the SDI input is available by keying in 85 on the RCU.

Digital Vide o

D IG IT A L V ID E O S O U R C E

5975938 BARCOREALITY 9200TCR+ 020798 5-9