Random Access Adjustment Mode
Dynamic Color Depth
Increases color contrast for all video and data sources. To change the dynamic color depth value :
1Push the cursor key or to highlight 'Dynamic Color Depth'.
2 Press ENTER to select.
3 Change the value by pushing the cursor key or until the desired color contrast is reached.
Adjustment range : 0 ... 8
Default : 4
4 Press EXIT to return to the Picture Tuning menu.
Noise Reduction
Reduces noise and pixel jitter in all video and data sources.
To change the noise reduction value :
1Push the cursor key or to highlight 'Noise Reduction'.
2 Press ENTER to select.
3 Change the value by pushing the cursor key or until the desired noise level is reached.
Adjustment range : 0 ... 8
4 Press EXIT to return to the Picture Tuning menu.
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH 
NOISE REDUCTION
INPUT BALANCE
Select with 
or 
then <ENTER> <EXIT> to return.
DYNAMIC COLOR DEPTH 4
08
PICTURE TUNING
CTI [ON]
COLOR TEMPERATURE
GAMMA
DECODING [EBU]
DYNAMIC COLOR DEPTH 
NOISE REDUCTION
INPUT BALANCE
Select with 
or 
then <ENTER> <EXIT> to return.
| NOISE REDUCTION |
0 | 8 |
Input Balance
The input balance is normally correct adjusted in the factory. But due to signal distribution or signal transmission, a color imbalance can be the result. This imbalance can be adjusted source by source for color critical applications. These adjustments influence only the actual custom adjustment file. This procedure is not so easy
.
Attention : Before starting the Input Balance function, generate a signal with dominant black and white areas.
The default values are normally loaded when selecting a source. If the image is not as desired, adjust for this source as follow :
Start with the Black Balance :
1Push the cursor key or to highlight 'Black Balance'.
2 Press ENTER to select.
3 Put the Black Balance Red and Blue to
4 Adjust the Brightness to a maximum value until there is just no green noise visible in the black areas.
5 Adjust with the cursor key or or or until there is just no red or blue noise visible in the black areas.
Continue with the White Balance :
1Push the cursor key or to highlight 'White Balance'.
2 Press ENTER to select.
3 Put the Gain Red and the Gain Blue to
4 Adjust the Contrast to a maximum value until the green noise becomes visible in the white areas and return one step.
5 Adjust with the cursor key or or or until the red respectively blue noise becomes visible in the white areas and return one step.
PICTURE TUNING |
|
|
CTI [ON] |
|
|
COLOR TEMPERATURE |
| |
GAMMA |
|
|
DECODING [EBU] |
|
|
DYNAMIC COLOR DEPTH |
| |
NOISE REDUCTION |
|
|
INPUT BALANCE |
|
|
then <ENTER> |
|
|
<EXIT> to | INPUT BALANCE | |
| ||
| WHITE BALANCE | |
| BLACK BALANCE | |
| DEFAULT |
|
| ADJUST |
|
| RED WITH | OR |
| BLUE WITH | OR |
| 5976052 BARCOREALITY 9300 070999 | |
|
