Installation Mode
Red on Green convergence
1Highlight 'Red on Green' by pushing the cursor key or and press ENTER to display the Red on green
test pattern.
The drawings and digit will be displayed in red.
2Adjust position 1, 2 and 3 to obtain an optimal focus for these lines.
3Due to interaction, it will be necessary to repeat step 2.
4Adjust position 4 and 5 for optimal convergence of the lines in 4 and 5.
5Adjust position 6 for optimal convergence of the vertical lines in 6.
6Check if all lines are correctly converged.
CONVERGENCE | |
GREEN TO MIDPOSITION | |
GREEN |
|
BLUE ON GREEN | |
RED ON GREEN | |
HATCH |
|
ABOUT MOCA | |
Select with | or |
then <ENTER> | |
<EXIT> to return. | |
Hatch
To check the result of the convergence adjustment :
1Push the cursor key or to highlight 'Hatch'.
2 Press ENTER to select.
A hatch pattern will be displayed on the screen.
All lines must be displayed in white, if not so repeat the convergence adjustment procedure.
About MOCA
This item gives information about the software version of the MOCA unit.
1Push the cursor key or to highlight 'About MOCA'.
2 Press ENTER to select.
Software version of the MOCA unit is indicated on the menu.
CONVERGENCE |
GREEN TO MIDPOSITION |
GREEN |
BLUE ON GREEN |
RED ON GREEN |
HATCH |
ABOUT MOCA |
CONVERGENCE |
GREEN TO MIDPOSITION |
GREEN |
BLUE ON GREEN |
RED ON GREEN |
HATCH |
ABOUT MOCA |
About MOCA |
MOtorized |
Convergence |
Adjustment |
Soft version : 1.00 |
5976052 BARCOREALITY 9300 070999 |
| |
|
