Barco R9001560 manual Starting up the Installation Mode, Input Slots

Installation Mode

9 INSTALLATION MODE

Starting up the Installation Mode

Push the cursor key  or  to highlight 'Installation Mode' and then press ENTER.

The following item can be selected in the Installation mode :

Input slots : to set up the input priority.

800 Peripheral : to select the type of output module used in the RCVDS05.

Convergence : to align the red, green and blue image.

Configuration : to set up the projector position.

OSD color : to change the color of the highlighted item.

No Signal : to display a black or blue screen when no source is connected to the projector.

Internal Patterns

Input Slots

The input configuration of the variable inputs is shown in the input slots menu. To view or to change the input configuration :

1Push the cursor key  or  to highlight 'Input Slots'.

2 Press ENTER to select.

The internal system will scan the input slots and displays the result in the Input slots menu.

Source	indication
Video or S-Video	Video[Video]
	Video[S-Video]
RGB analog	RGB-SS[CV] : separate sync is composite video
	signal on H/C input
	RGB-SS[CS or HS&VS] : separate sync is
	composite sync or horizontal and vertical
	sync
	RGB-SOG : sync on green
Component video	Component Video - SS : component video
	with separate sync
	Component Video - SOY : component video
	with sync on Y
	Component Video - 3LSS : component video
	with 3 level separate sync.
	Component Video - 3LSOY : component
	video with 3 level sync on Y.
RGB analog with
tri-level sync	RGB3L-SS : RGB with separate Tri level sync
	RGB3L-SOG : RGB with Tri level sync on
	green

For slot 1 and slot 2, see chapter 'Connections'

If a RCVDS (switched on) or VS05 is connected to the projector, it will be also indicated on the menu by adding +800 peripheral. If no 800 peripheral indication is made on the menu, there are still two possi- bilities :

-no RCVDS or VS05 connected or

-RCVDS is switched off.

When a 800 peripheral is connected to the projector, the input slots are not accessible with the control disc to toggle their function.

ADJUSTMENT MODE

Select a path from below :

RANDOM ACCESS

INSTALLATION

SERVICE

Source 01

INSTALLATION

INPUT SLOTS

800 PERIPHERAL

CONVERGENCE

CONFIGURATION

OSD COLOR

NO SIGNAL [BLACK] INTERNAL PATTERNS

Select with or

then <ENTER>

<EXIT> to return.

INSTALLATION

INPUT SLOTS

800 PERIPHERAL

CONVERGENCE

CONFIGURATION

OSD COLOR

NO SIGNAL [BLACK] INTERNAL PATTERNS

Select with	or
then <ENTER>
<EXIT>		INPUT SLOTS
	1. RGB-SS [CV]
	2. RGB-SOG
	3.	Video [Video]
	4.	Component Video
	5. Digital Input

9-1 5976052 BARCOREALITY 9300 070999