Service Mode
Change Language
1Push the cursor key or to highlight 'Change Language'.
2 Press ENTER to display the language selection menu. Available languages : English
Change Projector Address
SERVICE
IDENTIFICATION
CHANGE
PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
Select with | CHANGE LANGUAGE | |
|
| |
then | English | |
| ||
| Select with | or |
| then <ENTER> | |
| <EXIT> to | return. |
Every projector requires an individual address between 0 and 255. This address can be software installed.
To change that address :
1Push the cursor key or to highlight 'Change Proj.
Address'.
2Press ENTER.
The Change Projector Address menu will be displayed and the actual address will be filled in.
The first digit is highlighted. Enter the new projector address with :
1the digit keys on the RCU or the local keypad or
2use the control disc to the right or to the left to select a digit and change the value by pushing the control disc up or down until the new value is reached. Continue with the other digits on the same way.
Change Baudrate PC
The communication speed between projector and computer, e.g. PC or MAC, has 8 possible speeds. The baud rate speed can be software set.
1Push the cursor key or to highlight 'Change Bau rate PC'.
2 Press ENTER to display the Change Baudrate PC menu.
The following baud rates are available :
230400/115200/57600/38400/19200/9600/4800/1200
The actual baud rate will be highlighted.
To change the baud rate :
1Push the cursor key or to highlight the new baudrate setting.
2Press ENTER to accept.
Reset Lamp Runtime
Reset lamp run time is only allowed when a new lamp is installed.
1Push the cursor key or to highlight 'Reset Lamp Runtime'.
2 Press ENTER to select.
When Reset Lamp Run Time is selected in the Service Mode selection menu, the following warning will be displayed :
Risk of electrical shock. Reset lamp run time is reserved to qualified service personnel.
If you are not qualified, press EXIT to cancel the reset operation.
SERVICE |
|
|
|
IDENTIFICATION |
|
|
|
CHANGE PASSWORD |
|
|
|
CHANGE LANGUAGE |
|
|
|
CHANGE PROJ. ADDRESS |
|
|
|
CHANGE BAUDRATE PC |
|
|
|
RESET LAMP RUNTIME |
|
|
|
LAMP RUNTINE HISTORY |
|
|
|
LAMP DRIVE MODE |
|
|
|
MORE ... |
|
|
|
then <ENTER> |
|
|
|
<EXIT> to return. |
|
|
|
CHANGE PROJ. ADDRESS | |||
Enter new address | |||
001 |
|
| |
Select with | or | ||
Reprogram with | or | ||
or numeric keys |
| ||
<ENTER> | to | confirm | |
<EXIT> | to | return |
|
SERVICE |
| ||
IDENTIFICATION
CHANGE
PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE : NORMAL
MORE...
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
SERVICE
IDENTIFICATION
CHANGE
PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
CHANGE BAUDRATE PC
RESET LAMP RUNTIME
LAMP RUNTINE HISTORY
LAMP DRIVE MODE
MORE
WARNING
Select
RISK OF ELECTRICAL SHOCK
______________________________________________________________
RESET LAMP RUN TIME 
is reserved to
qualified
service personnel
<ENTER> to accept
<EXIT> to return.
| 5976052 BARCOREALITY 9300 070999 | |
|
