Barco R9001560 manual RGB Analog Input Module

Connections

RGB Analog Input Module.

RGB analog input terminals with separate Horizontal and Vertical sync inputs(RGB-HV), with Composite sync input(RGB-S) or with Sync signals on green(RGsB).

Always use an interface when a computer and local monitor have to be connected to the projector. See 'slot 1' for interfaces to be applied.

RGBS/RGsB analog : 5 x BNC Red : 0.7 Vpp ± 3 dB

Blue : 0.7 Vpp ± 3 dB

Green : 0.7 Vpp ± 3 dB

1 Vpp ± 3 dB if sync on green Vert. sync : 1 Vpp to 4 Vpp ± 3 dB Hor. sync / Composite sync :

			PROJECTOR MODE :
			GREEN - OPERATION	DIAGNOSTICS
RS232 OUT	RS232 IN	COMMUNICATIONPORT	RED - STANDBY	IR-ACKNOWLEDGED CODE	IR-RECEIVER
		(800-PERIPHERALS)	REMOTE			SDI IN	SDI OUT	XLR

IR-RECEIVED

R

G

B

H

V

R

G

B

H/ C

V

R

G

B

H/ C

V

9827910

On

R	G	B	C	V	27910
On
					98

1 Vpp to 4 Vpp ± 3 dB

All input signals are always 75 ohm terminated, even in the "not selected" mode.

RGB input selection :

Key in the corresponding slot number on the RCU or the local keypad.

Straps on module level :

Floating or non-floating input.

Red :	J3	: strap "yes" : non floating	strap "no" : floating
Green : J4 : strap "yes" : non floating			strap "no" : floating
Blue :	J5	: strap "yes" : non floating	strap "no" : floating
H/C :	J6	: strap "yes" : non floating	strap "no" : floating
V :	J7	: strap "yes" : non floating	strap "no" : floating

Factory preset : strap "yes", non floating input

Sync selection : strap on module level.

J8 : see drawing

Factory preset : separate sync.

Sync selection on the Input Slots menu.

The horizontal sync input can be set as separate sync input or as separate sync + video input.

Red

Green

Blue

Vert. sync

Hor. sync or Composite sync

Non-Floating

Floating

5-6 5976052 BARCOREALITY 9300 070999