Service Mode

Lamp Run Time History

To get an overview of the different lamp run times :

1Push the cursor key or to highlight 'Lamp Run Time History'.

2Press ENTER to select.

A listing with the lamp serial number and the corresponding run time will be displayed.

The actual installed lamp will be marked.

Press EXIT to return to the service mode selection menu.

Lamp Drive Mode

The lamp can be driven in three different modes : SILENT, NORMAL or BOOST.

1Push the cursor key or to highlight 'Lamp Drive Mode'.

2 Press ENTER to select.

3Push the cursor key or to highlight the desired lamp drive mode.

4Press ENTER to select.

BARCO logo

The BARCO logo can be added to the image, in overlay or on a background, on any place on the screen.

To add the BARCO logo or to change a setting in the BARCO logo menu:

1Push the cursor key or to highlight 'BARCO logo'.

2 Press ENTER to select.

The BARCO logo menu will be displayed on the screen. Within this menu, three toggle settings and a shift control are available.

STATUS [ON/OFF]

ON : BARCO logo will be displayed on the screen.

OFF : No BARCO logo displayed on the screen.

BACKGROUND [ON/OFF]

ON : BARCO logo will be displayed on a black background.

OFF : BARCO logo will be displayed without any background.

SHIFT

By pushing the control disc up, down, to the left or to the right, the BARCO logo can be positioned anywhere on the screen.

HOT KEY [TEXT/OFF]

OFF : no key on the RCU is used to display the BARCO logo.

TEXT : the TEXT key on the RCU is used to display or to remove the BARCO logo with one single push on this key (only in operational :mode).

SERVICE

IDENTIFICATION

CHANGE PASSWORD

CHANGE LANGUAGE

CHANGE PROJ. ADDRESS

CHANGE BAUDRATE PC

RESET LAMP RUNTIME

LAMP RUNTINE HISTORY

LAMP DRIVE MODE

MORE...

Select with

or

 

then <ENTER> LAMP RUNTIME HISTORY

<EXIT> to

 

 

 

Serial No

Runtime

-----------------------------------------------------

>

0111121

600 h

 

0110031

980 h

 

0110010

1000 h

-----------------------------------------------------

 

<EXIT>

to return

SERVICE

IDENTIFICATION

CHANGEPASSWORD

CHANGE LANGUAGE

CHANGE PROJ. ADDRESS

CHANGE BAUDRATE PC

RESET LAMP RUNTIME

LAMP RUNTINE HISTORY

LAMP DRIVE MODE

LAMP DRIVE MODE

SILENT

NORMAL

BOOST

Select with

or

then <ENTER>

<EXIT> to

return.

SERVICE

BARCO LOGO

PANEL ADJUSTMENTS

UNIFORMITY

PRESET INPUT BALANCE

I2C DIAGNOSIS

MORE...

BARCO LOGO

STATUS : ON

BACKGROUND : ON

SHIFT

HOT KEY : TEXT

Select with or then <ENTER> <EXIT> to return.

5976052 BARCOREALITY 9300 070999

 

10-5

 

Page 51
Image 51
Barco R9001560 manual Lamp Run Time History, Lamp Drive Mode, Barco logo