Random Access Adjustment Mode
Clamp Width : The width of the clamp pulse
Can be any value between 0 and 255. Change the value by pushing the cursor key or .
Field Polarity :
The field polarity function is used for interlaced images. Both rasters of the image could be shifted in a wrong way (double lines are visilble in the image). This can be corrected by forcing the field polarity to [neg] or [pos].
Use the ENTER key to toggle between [pos] and [neg].
Field Select : Default [both]
The field select is only used for interlaced images. One frame of an interlaced image contains two fields, an even and an odd field. The choice exists to project [both] fields on the screen or only the [even] or [odd] field. This can be useful for 3D projection.
Use the ENTER key to toggle between [both], [even] and [odd].
Vertical Refresh [sync/async] : The way of updating the image information on the LCD panels. Not available for
*For sources with a vertical frequency up to 60 Hz : the vertical refresh rate is the same as the vertical frequency of the incoming source. This is a necessity to project moving images without 'motion artifacts'. For stationary images with a vertical frequency up to 60 Hz it is still possible to use asynchronous refresh. When loading Pal, Secam,
*For sources with a vertical frequency higher that 60 Hz : the vertical refresh is different than the vertical frequency of the incoming source. Synchronous refresh cannot be used.
Vertical Sync Polarity : [leading] or [trailing]
The vertical refresh can be synchronised with the leading sync edge or trailing sync edge. Default on [leading].
Toggling to [trailing] is only necessary for special applications where the trailing edge of the sync signal has to be taken as a reference.
Use the ENTER key to toggle between [leading] or [trailing]
Press EXIT to leave the Edit File Option menu. A 'Confirm Edit File' menu will be displayed.
Press ENTER to confirm and to save the new settings or EXIT to return without saving the new entered settings.
| CONFIRM |
| ||
| EDIT FILE |
| ||
Save | changes to | file | ||
| xga.c30? |
| ||
<ENTER> | to | confirm | ||
<EXIT> | to | return | ||
Rename
To change the name of a selected file:
1Push the cursor key or to highlight 'Rename'.
2 Press ENTER.
The Rename selection menu will be displayed.
3 Push the cursor key or to select a file name.
4 Press ENTER to select.
The Rename menu will be displayed with the selected file name already filled in, leave in the 'From file name :' area and in the 'To file name :' area.
FILE SERVICE |
|
| |
LOAD |
|
|
|
EDIT |
|
|
|
RENAME |
|
| |
COPY |
|
| |
DELETE |
|
| |
with | or | RENAME FILE | |
then |
| ||
<EXIT> | Filename | Src | Resolution |
| |||
| |||
| Video525.s01 1 | 675x240i | |
| Video525.c01 1 | 675x240i | |
| Video525.c02 1 | 675x240i | |
| |||
| Active file | : Video525.c50 | |
| Select with | or | |
| <ENTER> to accept | ||
|
| <EXIT> to | return. |
The first character is highlighted.
1Push the cursor key or to select the desired character.
2 Change that character by pushing the cursor key or . Numeric characters can be entered directly with numeric keys on the RCU.
3 Press ENTER to confirm. The renamed file is entered in the list of files.
4 Press EXIT to return to the Rename menu selection. No changes are made.
RENAME FILE
Frome
file name :
Video525.s01 To file name : demo.c10
Select with 
or
Reprogram with 
or
or numeric keys
<ENTER> to confirm
<EXIT> to return
| 5976052 BARCOREALITY 9300 070999 | |
|
