3. Advanced Commands
Command
Command [0] \x23
Command [1] \xa8
3.31.12 VCO,write
Description
Writes a new VCO value to the projector
Command
Command [0] \x20
Command [1] \xa8
Data
Data [0] = VCO value
Data[0] = unsigned byte
The range can be found with the “read max/min” commands:
range min: "Minimum VCO, Read", page 151
range max :"Maximum VCO, Read", page 151
3.31.13 VCO, Read
Description
Reads the actual VCO value of the projector
Command
Command [0] \x21
Command [1] \xa8
Returned Data
Data [0] = VCO value
data type = unsigned byte
Example
Reads the actual VCO value , the awnser being \x00
Transm it
Start \xfe
Projector address \x01
Command[0] \x21
Command[1] \xa8
Checksum \xca
Stop \xff
150 R5976884 RLM SERIES 04/04/2006