2. Basic Commands
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
2.9 Source selection
Description
Selects an input source.
Command
Command [0] \x38
Data
Data[0] = bySource, byte describing the source to be linked to the window.
Byte value source
1BNC’s
2D15
3Composite video
4SVideo
5DVI
6Firewire
7SDI
8IQ PC
For more info about the input configurations, see the projector’s Owner’s manual.
Data[1] = byMode
for BNC’s and D15: the data byte gives the type of signal present on the BNC’s/D15
Byte value Mode
0RGBHV
1RGBCS (analog4)
2RGBCS (digital)
3RGsB
100 (x\64)PrYPb
101(x\65) RGB video
102(x\66) RGSB video
4. the signal present on the Cs signal is a composite video signal containing the composite sync
46 R5976884 RLM SERIES 04/04/2006