2. Basic Commands
2.7.33 Phase, Write
Description
Writes a new Phase value to the projector
Command
Command [0] \x20
Command [1] \x06
Data
Data [0] = Phase value
value = unsigned byte
Example
Writes a new Phase value of \x1a to the projector
Transm it
Start \xfe
Projector address \x01
Command[0] \x20
Command[1] \x06
Data \x1a
Checksum \x41
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
Checksum \x07
Stop \xff
2.7.34 Phase, Read
Description
Reads the actual Phase value of the projector
Command
Command [0] \x21
Command [1] \x06
Returned Data
Data [0] = Phase value
42 R5976884 RLM SERIES 04/04/2006