3. Advanced Commands
for xga resolution panels : wpixels = 1024 ; wlines = 768 lines
3.34 Logo status, Read
Description
Reads the status of the logo.
Command
Command [0] \xf1
Command [1] \x01
Returned Data
Data [0] =byStatus = 1 byte representing the status of the logo
bit7 bit6 bit5 bit4 bit3 bit2 bit1 bit0
- - - - - saving valid fullscreen active
Table3-289
byStatusbyte description
3.35 Take screenshot (Logo)
Description
Takesa screenshot of the projected image for the logo, the logo image information is stored in an SDRAM.
Command
Command [0] \xf1
Command [1] \x86
Example
Takesa screenshot
Transm it
Start \xfe
Projector address \x01
Command[0] \xf1
Command[1] \x86
Checksum \x78
Stop \xff
Receive (acknowledge)
Start \xfe
Projector address \x01
Command[0] \x00
Command[1] \x06
160 R5976884 RLM SERIES 04/04/2006