4. RCU commands

4. RCU COMMANDS

4.1 Overview

Introduction
The RCU keys can be simulated by using the RCU command \x30 (see RCU commands command)
followed by one of the following codes.
Key simulation will only work if the function is supported by the firmware.
RCU
Button Command
0\x19
1\x10
2\x11
3\x12
4\x13
5\x14
6\x15
7\x16
8\x17
9\x18
Standby \x0e
Mute \x1f
Text \x0d
Volume “+” \x38
Volume “-” \x39
Brightness \x27
Brightness “+” \x2a
Brightness “-” \x2b
Contrast \x25
Contrast “-” \x28
Contrast “+” \x29
Color \x30
Color “+” \x2c
Color “-” \x2d
Bass “+” \x3a
Bass “-” \x3b
R5976884 RLM SERIES 04/04/2006 165