_K==oÉãçíÉ=`çåíêçä
Command Updates — Firmware Revision 3.00
lpafpq^q
•
•
•
Description: Query only command for the presence of SDI output connector
Query Format: OSDISTAT
Query Response: OSDISTAT
lrqjlab
•
•
•
•
•
•
•
Description: Selects the Output Display Mode. (Matrix mode is only available on
Command Format: OUTMODE - m (mode)
Parameters:
Query Format: OUTMODE
Query Response: OUTMODE - m (mode)
List Format: OUTMODE
List Response:
1:"FullScreen"
2:"PIP"
3:"Matrix"
mbkamfm
•
•
•
•
•
Description: A value of 1 pends a change to the PIP mode (enabled to disabled or disabled to enabled) that will occur on the next TAKE command. A value of 0 cancels the pended change to the PIP mode.
When pending a change, the PIP button blinks to denote a pending change to the PIP. When changing from enabled to disabled, the PIP raster outline is removed and the next TAKE will bring the PIP down from Program. When changing from disabled to enabled, the PIP raster outline will be shown and the next TAKE will bring the PIP up to Program.
If AutoTake is enabled, then the PIP mode will change without having to send a TAKE command. The query returns whether there is a PIP mode change pended. This is intended as an internal command for the front panel but could be used externally as well.
Command Format: PENDPIP
Parameters:
1 - pend PIP mode change and update on next TAKE Query Format: PENDPIP
Query Response: PENDPIP
mfmcobbwb
•
•
Description: Sets the freeze mode of the input of the specified PIP.
Command Format: PIPFREEZE
PDS • User’s Guide |
| 167 |
|