Barco SJ/T 11363-2006 manual Output Sync Select, HD-15 Sync DVI Sync +H+V, Saving Output Config

4. Operation

Setup Menu

position in lines. Positioning is limited to the overall maximum V Size “space”, and the image cannot be moved off screen.

•Reset All— This function resets H and V Size to the currently selected output format resolution, and H and V Position to [0].

póåÅ=pÉííáåÖë

From the Output Menu, select Sync Setup to display the Output Sync Select Menu:

OUTPUT SYNC SELECT
> HD-15 Sync	-H-V
DVI Sync	+H+V

Figure 4-27.Output Sync Select Menu (sample)

The Output Sync Select Menu enables you to independently adjust the output sync polarity of the Analog and DVI outputs. The following functions are available:

•HD-15 Sync — This field sets the analog output sync polarity.

~

~

Values: CSync, -H-V, -H+V, +H-V, +H+V

Default: -H-V

•DVI Sync — This field sets the DVI output sync polarity.

~

~

Values: -H-V, -H+V, +H-V, +H+V

Default: +H+V

d~ãã~

From the Output Menu, select Gamma to specify the output Gamma.

•Adjustment range: 1.0 to 3.0, in steps of 0.1

•Default: 1.0

p~îÉ=`çåÑáÖ

From the Output Menu, select Save Config to save the current output configuration. A message is briefly shown, after which the system returns to the Output Menu.

Saving Output Config

Figure 4-28.Saving Output Configuration Message

Please note the following important points regarding the output configuration file:

•When you perform the Save Config function, all configuration parameters from the Output Menu are saved in non-volatile memory. If you do not perform the function, output data will not be restored upon the next system power up.

54 PDS • User’s Guide