![](/images/new-backgrounds/1168258/16825883x1.webp)
4. Operation
Control Overview
`çåíêçä=lîÉêîáÉï
There are several ways to control the PDS:
•
•
•
The front panel is ideal for all basic operations. Available controls include the Display Section and the buttons in the Inputs Section and the Effects Section.
The
The PDS can also be controlled remotely via Ethernet or Serial communications. See Appendix B “Remote Control” on page 129 for additional details.
mçïÉêJré=fåáíá~äáò~íáçå
After connecting power to the PDS, locate the power switch on the back of the chassis, and turn power ON. While the system is initializing, the following messages are displayed:
Initializing
...
Figure 4-1. System Initialization Message 1 (sample)
Program Loading
please wait...
Figure 4-2. System Initialization Message 2 (sample)
PDS-902
Barco
Version 1.0
Initializing...
Figure 4-3. System Initialization Message 4 (sample)
The “version” line in the above menu shows the software version that is currently installed. This version number changes as software upgrades are released.
When you first start up a PDS that has stored logos, a message like the one in the following
26 |
| PDS • User’s Guide |
|