PDS • User’s Guide 97
6. Upgrading Firmware
Downloading Firmware via FTP or Web Site
açïåäç~ÇáåÖ=cáêãï~êÉ=îá~=cqm=çê=tÉÄ=páíÉ
Two different methods can be used to download PDS firmware:
Via FTP Site
Via Web Site

sá~=cqm=páíÉ

Barco Folsom's FTP site address is: ftp.folsom.com
To download firmware from the FTP site:
1. Create a target folder on your PC or USB Flash drive (e.g., PDS).
2. Ensure that your PC is connected to the internet.
3. Log on to the FTP site using one of the following methods:
a. If you are using an FTP client such as Ipswitch WS_FTP Professional,
log on to our site as follows:
FTP Site: ftp.folsom.com
User name: anonymous
Password: your email address
Example: johndoe@somecompany.com
b. If you are using a web browser, point the browser to:
ftp://ftp.folsom.com
c. To use Windows Explorer, right-click the Start button, then click Explore.
When the Explorer window opens, enter the FTP site in the address bar.
4. Once logged on, navigate to the following directory:
ftp://ftp.folsom.com/Image Processing/PDS/
5. Transfer the following file to the target folder on your PC:
PDS_Rev##.##.zip
6. Go to the folder that was used to save the downloaded file and "unzip" the
contents of this file.
7. Please continue with the “Upgrading Firmware Using the Web Upgrade
section on page 100 or “Upgrading Firmware Using the USB Port” section on
page 98.

sá~=tÉÄ=páíÉ

Barco's web site address is: www.barco.com
To download firmware from the web site:
1. Create a target folder on your PC or USB Flash drive (e.g., PDS).
Note If you are using Internet Explorer 7 or 8, after entering the
FTP address, click Page, and then click Open FTP Site in
Windows Explorer.