Barco SJ/T 11363-2006 manual BñÉÅìíáîÉ=jçÇÉ, Executive Mode, SEL = Enable ESC = Cancel

Models: SJ/T 11363-2006

1 202
Download 202 pages 53.42 Kb
Page 87
Image 87

4. Operation

Setup Menu

The following functions are available:

Input — selects the exact inputs that you wish to set: ALL (inputs 5 through 8), 5 (individually), 6 (individually), 7 (individually), or 8 (individually).

Note

Inputs 5 through 8 do not need to be selected on the front panel for this menu to change, and to apply the equalization settings.

Equalization — The equalization adjustment range is from 0 (short cable equalization) to 15 (long cable equalization). The default value is 12, which indicates “moderate” equalization.

In general, the default should be adequate for most users, unless cables longer than 5M are used, and unless your signals are running at high pixel clock rates (e.g., UXGA).

Set to Default — sets the Equalization field to the default setting of 12.

Note

Equalization is a subjective “visual” adjustment, which depends on three important factors: cable length, signal quality and cable quality. If you adjust the equalization, optimize the setting for the lowest amount of visual artifacts.

Set to Maximum — sets the Equalization field to the maximum setting of 15. Set to Minimum — sets the Equalization field to the minimum setting of 0.

bñÉÅìíáîÉ=jçÇÉ

From the System Menu, select Executive Mode to initiate a limited front-panel lockout. Executive mode enables seamless transitions between input sources without the need to press TAKE. In Executive lockout mode:

Button pushes will be ignored for all buttons except the nine input buttons and LOGO. All turns of the rotary knobs will be ignored.

To take an input source to Program, press the input or LOGO button without pressing TAKE. The transition is seamless, even if you have Auto Take (in the User Preference Menu) turned off.

All Ethernet and serial communications commands will function normally. All button lights will continue to reflect the proper state of the inputs.

Use the following steps to enable and disable executive lockout mode:

1.From the Setup Menu, choose the System Menu.

2.Select Executive Mode. The following submenu appears:

EXECUTIVE MODE

<SEL> = Enable

<ESC> = Cancel

Figure 4-51.Executive Mode Menu (sample)

PDS • User’s Guide

 

71

 

Page 87
Image 87
Barco SJ/T 11363-2006 manual BñÉÅìíáîÉ=jçÇÉ, Executive Mode, SEL = Enable ESC = Cancel

SJ/T 11363-2006 specifications

Barco SJ/T 11363-2006 is a significant technical standard issued in China that focuses on the methods and guidelines for determining the optical performance of digital displays. Developed to enhance the quality and consistency of visual display technologies, this standard serves as a crucial reference for manufacturers and end-users alike.

One of the main features of Barco SJ/T 11363-2006 is its emphasis on quantitative assessment of attributes that are vital for display performance. This includes parameters such as brightness, contrast ratio, color accuracy, and response time. By establishing clear testing protocols and benchmarks, the standard enables a uniform evaluation process across various display technologies including LCD, LED, and OLED displays.

A key aspect of Barco SJ/T 11363-2006 is its incorporation of technologies that measure the viewing experience. This includes both subjective and objective test methods. The subjective methods involve human observers assessing the display quality under controlled lighting conditions, whereas objective methods employ sophisticated instruments to measure optical properties. This dual approach ensures a comprehensive analysis of how displays perform in real-world scenarios and their alignment with user expectations.

The standard also addresses energy efficiency, prompting manufacturers to consider power consumption alongside performance metrics. This characteristic is increasingly important as consumers demand more environmentally friendly technologies. By promoting energy-efficient designs, Barco SJ/T 11363-2006 aligns with global efforts to reduce the carbon footprint of electronic devices.

Moreover, Barco SJ/T 11363-2006 encourages innovation in display technologies by providing a framework where manufacturers can test and showcase their advancements in optical performance. This not only fosters healthy competition in the market but also accelerates technological progress in display manufacturing.

In summary, Barco SJ/T 11363-2006 plays a vital role in standardizing the evaluation of digital displays in China. Through its focus on various optical performance metrics, the incorporation of advanced testing technologies, and a commitment to energy efficiency, this standard not only enhances product quality but also improves user satisfaction. Its influence extends beyond national borders, as it sets a precedent for similar standards worldwide in the digital display industry.