Barco SJ/T 11363-2006 manual Auto Input Cfg

4. Operation

Quick Function Reference

Table 4-1.PDS Quick Function Reference Table	(Continued)
How to:		Use the Following Section:	Page
Set Auto Input Cfg mode		Auto Input Cfg	62
Set Auto Input Save mode		Auto Input Save	62
Set Auto Take mode		Auto Take	63
Set Black Auto Take mode		Black Auto Take	63
Set color input space		Colorspace	40
Set DVI cable equalization		DVI Cable Equal	70
Set Ethernet parameters		Ethernet	66
Set Auto Acquire mode		Auto Acquire	61
Set input format		Input Format	39
Set input type		Type	40
Set Menu Context mode		Menu Context	64
Set or change multiple input configurations		File Association	72
Set or change a single input configuration		Recall Config	50
Set output format		Output Format	52
Set Preview or Program mode		Adjust On	40
Set Serial port parameters		Serial Setup	68
Set up EDID		Input EDID	69
Set up Logo		Logo Menu	59
Set up sync		Sync Settings	54
Set user preferences		User Preference Menu	60
Set VFD brightness		VFD Brightness	65
Understand auto acquire		Using Auto Acquire	79
Use Black		Using Black	83
Use Freeze		Using Freeze	83
Use HDCP		Using HDCPWith PDS, the HDCP	79
		mode is essentially automatic.
		Provided that you connect an
		HDCP compliant monitor, you can
		select and switch between
		unprotected sources and
		“protected” HDCP sources (e.g., a
		Blu-Ray player) without
		restriction.
Use inputs		Using Inputs	77
Use the Input Menu		Input Menu	38
Use the Logo		Using the Logo	80
Use the Logo Menu		Logo Menu	59

PDS • User’s Guide 33