PDS • User’s Guide 55
4. Operation
Setup Menu
If you make a change in the Output Menu, and attempt to exit the menu (by
pressing ESC) without saving changes, the system displays the following prompt:
Figure 4-29. Save Output Configuration Prompt
~Select Yes (SEL) to save changes.
~Select No (ESC) to continue operation without saving the changes.
mêÉîáÉï=jÉåì=Emap=VMO=låäóF
From the Output Menu, select Preview to configure the PDS’s Preview output. The
Preview output allows you to view, resize, and otherwise adjust the input source before
taking it to Program. You can preview each of the input sources (1 through 8, SDI and
LOGO). The input source is scaled to the selectable progressive resolution and output on
the DVI Digital and HD-15 analog VGA connectors.
The following illustration shows the Preview Menu:
Figure 4-30. Preview Menu (sample)
The following sections provide detailed information about Preview Menu functions:
lìíéìí=pêÅ
In the Preview Menu, choose Output Src to select the source to be displayed on the
preview monitor. The source can be either Preview or Program.
Save Output Cfg?
<SEL> = Yes
<ESC> = No
PREVIEW
Output Src Program
1024x768@59.94
Test Pattern >>
Sync Setup >>
Save Config
Note After you view and adjust a source on the preview monitor,
and press TAKE to bring it to Program, the preview and
Program images exchange positions, or “flip-flop,” as
described in the “Flip-flop Mode” section on page 78. There
is a slight delay in the image exchange between the preview
output and the Program output. The preview image appears
slightly after the Program image.
Output Src Sync Settings
Output Format Save Config
Test Patte rn