Barco SJ/T 11363-2006 Cáêãï~êÉ=réÖê~ÇÉ=lîÉêîáÉï, ~êÇï~êÉ=oÉèìáêÉãÉåíë, Cáêãï~êÉ=oÉèìáêÉãÉåíë

Models: SJ/T 11363-2006

1 202
Download 202 pages 53.42 Kb
Page 112
Image 112

6. Upgrading Firmware

Firmware Upgrade Overview

cáêãï~êÉ=réÖê~ÇÉ=lîÉêîáÉï

Firmware files for the PDS are loaded into the hardware at power-up. These files are stored in the unit’s onboard flash memory. The PDS’s system firmware can be easily upgraded using the steps described in the sections that follow.

e~êÇï~êÉ=oÉèìáêÉãÉåíë

The following hardware items are required for upgrading PDS firmware:

IBM compatible computer with an available Ethernet port Local Ethernet network, including an Ethernet switch

cáêãï~êÉ=oÉèìáêÉãÉåíë

The following list outlines firmware requirements for upgrading the PDS’s firmware:

Ensure that your PC (or laptop) uses the Windows® 7, Windows® 2000, or Windows XP operating systems.

Ensure that your PC (or laptop) has a web browser installed, such as Windows Internet Explorer® or Mozilla Firefox®.

If using the Safari web browser, ensure that the following is NOT checked under Safari --> Preferences --> General menu:

~Open "safe" files after downloading.

Firmware files can be downloaded from either the Barco Folsom FTP site or the Barco website, as described in the following “Downloading Firmware via FTP or Web Site” section.

96

 

PDS • User’s Guide

 

Page 112
Image 112
Barco SJ/T 11363-2006 manual Cáêãï~êÉ=réÖê~ÇÉ=lîÉêîáÉï, ~êÇï~êÉ=oÉèìáêÉãÉåíë, Cáêãï~êÉ=oÉèìáêÉãÉåíë