Caution: Be sure that the module slides in on the guides provided. Failure to align the guides could result in bent and broken pins
BS0037A
Figure 8. Installing a 400-ST1 Cascade Module
4.Press the module firmly into the chassis slot. Be sure that the module is fully seated into the mating connector.
5.Secure the module in the chassis by tightening the thumb screws on the module front panel.
6.Repeat Steps 1 to 5 for each switch that is to be configured with the
7.Proceed to the next section “ Installing and Connecting Multiple Switches” on page 19.
18
