![](/images/new-backgrounds/1202799/20279969x1.webp)
Removing/Replacing Adjacent Units
To remove/replace adjacent units from an operating stack, complete the following steps (see Figure 14):
1.Remove the cascade cable from the Cascade A Out connector at unit 2.
1 | Unit 1 |
Cascade A Out | In |
Unit 2 |
Unit 3 |
Unit 4
Cascade A In
Unit 5
2 |
O ut
1 = Base unit
2 = Last unit
Unit 6
BS0043A
Figure 14. Removing Adjacent Units
33