Cascade A Out Connector
Provides an attachment point for connecting this unit to another unit via the cascade cable. A return cable from another unit’s Cascade A Out connector to this unit’s Cascade A In connector completes the stack connection (see the example shown in Figure 3).
Note: For stacking three or more units (maximum 8 units per stack), order the optional
1meter (39.27 inch) cascade
Unit Select Switch
The Unit Select switch (up = Base) determines the base unit for the stack configuration (see “ Base Unit Description” on page 7). The Unit Select switch status is displayed on the BayStack 450 LED display panel (see the Using the BayStack 450 10/100/1000 Series Switch guide for details). When in the Base (up) position, all other Unit Select switches in the stack configuration must be set to Off (down).
5
