Bay Technical Associates manual BayStack 400-ST1 Front Panel Components

If any items are missing or damaged, contact the sales agent or the customer service representative from whom you purchased the BayStack 400-ST1 cascade module. You will need a Phillips screwdriver for the installation.

Note: Unless otherwise specified, the terms “switch” and “unit” are used interchangeably in this guide.

BayStack 400-ST1 Front Panel Components

The front-panel components of the BayStack 400-ST1 Cascade Module are shown in Figure 2. Component descriptions follow the figure.

1

	Unit Select
Cascade A Out		Base	Cascade A In

4

23

1 = Blank connectors (unused)

2 = Cascade A Out connector

3 = Unit Select switch

4 = Cascade A In connector

BS0031A

Figure 2. Front Panel Components

4