BEA technical specifications LO-21P Wiring Diagrams, Operator

ELECTRICAL INSTALLATION – OPTION 1 –

STANDARD WIRING

WIRE CONNECTIONS

Black	Motor Input -
Red	Motor Input +
Purple	Bodyguard COM. Pin 3
White	Bodyguard Data (-) Pin 6
Black / White	Activation Sensor COM.
Orange	Power input / 12-24 VAC/VDC ( - )
Gray	Bodyguard N.O. Pin 4
Red / White	Bodyguard Data (+) Pin 7 & Activation Sensor N.O.
Brown	Power input / 12-24 VAC/VDC (+)
Green	Door Control Common
Blue	Door Control Activation
Yellow	Door Control safety

LO-21P WIRING DIAGRAMS:

STANDARD WIRING

The wiring shown below may be used on most models of operators. See wiring diagrams at back of this manual for specific diagrams.

BODYGUARD

NOTE: Bodyguard MUST be programmed to a Relay Output value of 2. Default is 1.

DATA + 7

DATA - 6

N.C. 5

N.O. 4

COM 3

POWER 2

POWER 1

24 V

115 VAC TRANSFORMER

brown	orange	purple	gray	white	red/white	Blk/white
NOTE:	LO-21P
LO-21P DIPSWITCH SETTINGS:
#1 THROUGH #5 - SET FOR
REQUIRED LOCKOUT TIME
#6 ON, #7 OFF, #8 ON

1 2 3 4 5

AUTO
OFF
HOLD
	MOTOR	OPERATOR
	+
red	-
black		Door Control
yellow
	SAFETY
green
	COMMON
blue
	ACTIVATION
	STALL
		Contacts to open
		at desired point of
		inhibiting
1 2 3 4 5 6 7 8	8 7 6 5 4 3 2 1
Approach SuperScan	Stall SuperScan
	(Swing Side)

EAGLE

NOTES:

•For pairs of doors, wire the additional SuperScans the same as shown above.

•For the inhibit function, operator mounted auxiliary switches may be used – dry contacts only.

•Bodyguard must be programmed to a relay value of 2.

75.5079.08 20061129 Page 2 of 13