INSTALLATION PRECAUTIONWhat is in the box
When you unpack your phone, make sure you keep all packing
materials in a safe place, in case you later need to transport it
or return it for servicing. In the box, you will find:
-handset
- 2 pieces of AAA type rechargeable 600mAh battery
- A piece ofbase unit
- AC adaptor
- Battery cover
- User Manual
- A telephone line cable
If you have purchased a multi-pack, for each additional
handset, youi will have the following:
- Additional handset
- 2 pieces of AAA type rechargeable 600mAh battery
- Charger
- AC adaptor
- Battery cover
Connection and condition for use
The phone can be connected to the public network using the
standard telephone plug and socket systems. You can connect
your phone to:
- A line connected directly to a local exchange, with its
own directory number.
- An extension socket connected to a local exchange
- An extension on an approved PABX.
Choosing a site for the Base
The base unit should be installed where:
- The mains adaptor plug will reach the 220V AC main
power supply.
- The telephone cable will reach your telephone line socket.
- It is not close to another telephone.
- It is not close to a sink, shower or anywhere else where it
might get wet
- It is not close to other electrical equipment (washing
machines, microwave oven, TV, fluorescent lights, etc.)
1. Choose a suitable site for the base
2. Plug-in the mains power lead and the telephone line cord
on the base back side, make sure the telephone line is
not yet connected to the telephone wall socket.
3. Plug the mains AC adaptor into the AC mains socket. The
base will beep.
Radio signal between handset and base
To use your cordless telephone, you must be able to establish a
radio link. It is therefore noted that:
- Placing the base unit as high as practical will give a
better result.
- Placing the base unit near any large metal object,
like refrigerator or filling cabinet may block the
transmission of radio signal.
- Other solid structures, like walls may reduce the
radio signal strength.
- 7 -