
CONNECTING AND CONFIGURING YOUR CABLE/DSL GATEWAY ROUTER
4.3When the transfer is complete, the Wizard will tell you that it is done and may reboot (restart) the Router.
4.4When configuration is complete, the Wizard will tell you “Router Setup Complete” and it will move to the next step.
4.5 Checking Internet
The Wizard will now check for an Internet connection. This can take a few minutes. The Wizard may not detect a connection right away. If not, it will retry a number of times. The “Connected” light on the front panel of the Router will flash during this time. Please be patient through this process. If at the end of this process the Wizard cannot connect to the Internet, use the Troubleshooting
14