Belkin F5D5231-4 For Computers Already Equipped with a Network Adapter, Click Add computers

CONNECTING AND CONFIGURING YOUR CABLE/DSL GATEWAY ROUTER

Step 5: Adding Other Computers to your Network Using the Easy Install Wizard

If you have other computers in your home that are already equipped with a network adapter, you can use the Easy Install Wizard to set up those computers to connect to your Router. If you are adding a Belkin network adapter your other computers, install the adapter per the instructions for the adapter. When the installation of the adapter is finished, your computer will be set up to connect to the Router. You do not need to use the Easy Install Wizard to set up the computer.

For Computers Already Equipped with a Network Adapter

5.1Connect an Ethernet cable between the computer you want to add to the network and the Router.

5.2Insert the CD into your CD-ROM drive. The Easy Installation Wizard screen will automatically pop-up on your screen within 15 seconds. If it does not, select your CD-ROM drive and double-click on the file named “Setup” on the CD-ROM.

5.3Click “Add computers”.

5.4The Wizard will make the changes needed to add your computer to the network. When finished, it will prompt to reboot your computer. Click “Yes”.

5.5When your computer reboots, your computer will be connected to the network. To begin surfing the Internet, open your browser and go to your favorite web page.

You are finished adding the computer to the network. To add more computers, repeat this process on each computer you wish to add.

16