Belkin Power Management Software
4.6. Control your UPS
Belkin Power Management Software for Unix gives you
the ability to shut down, restart, initiate self-tests and
issue other commands to your local UPS. Just type
“/etc/belkin/belkin issuer” to bring up the screens shown
below. The screen displayed would depend on the Belkin
Power Management Software configuration.
Belkin Power Management Software configured to
monitor the UPS from the serial port
Short Description of Each Option
[s] 10 Seconds Test
UPS performs a 10 seconds self-test then returns to
utility.
[b] Test until Battery Low
UPS performs self-test until battery becomes low.
55