Belkin Power Management Software
[u] Reboot UPS
UPS shuts off then turns back on.
[l] Put UPS to Sleep
Specify the duration of sleep using [+] and [-] keys.
UPS will not provide output power while in sleep mode.
[m] Simulate Power Fail
UPS switches to battery power.
[b] Conserve Battery
UPS on battery goes to sleep mode.
[d] Diagnostic Self Test
UPS performs a short diagnostic self-test.
[t] Test Run Time Calibration
The UPS discharges it’s batteries until capacity is less
than 25%
[f] Flash and Beep
UPS lights all indicators and beeps.
[I] Test Indicators
UPS performs a front panel lights test.
4.7. History Information
Belkin Power Management Software for Unix records all
power events in the file /etc/belkin/rupslog. You could
review this information to check if there was any
occurrence of power failure.
Use any text editor to open the file "/etc/belkin/rupslog".
57