6.When the Cold Inflation Pressure (CIP) values have been adjusted to the desired setting, press and hold the Return 
button for 3 seconds until the programming screen bellow is displayed.
Figure 21
7.Using the SmarTire
Figure 22
8.Press the Check 
button to initiate programming. You may also press the Return 
button to return to the CIP adjustment screen or press the 
button to return to the main menu.
9.Once programming has been initiated, the following screen is shown:
Figure 23
10. After successful programming, the following screen is shown:
Figure 24
11.Press the Return 
button to exit to the main menu.
12.In the case of a programming error, the following screen is shown:
Figure 25
If this occurs, ensure the SmarTire
Press the Check 
button to retry the operation, press the Return 
button to return to the CIP adjustment screen in step 5, or press the 
button to abort the programming and return to the main menu.
29
